Monthly Archives: April 2019

How to safely operate a Telescopic Boom Lift

Knowing how to operate and handle a Telescopic boom lift will make a difference in how efficiently, safely and profitably you complete the task.

Aerial lift equipment is used in a wide range of industries on construction sites. Boom lifts, in particular, are an ideal choice for where workers need to be lifted to reach high areas and get the job done.

Telescopic booms have higher horizontal outreach compared to any other type of aerial platform, suits for areas with limited access. Telescopic booms are also designed for productivity and drive speed you need to get around the area. It is said to have an easy to handle controls.

Screen Shot 2017-10-16 at 4.43.04 PM

Here are 16 steps on how to safely operate a telescopic boom lift:

  1. Study the project you are planning.
  2. Secure whatever tools and materials you need to perform the work.

      3.Familiarize the lift you lease or buy. In some instances of work, you must have an operator’s manual located on the equipment. Check and review all the controls, and learn their function in the manual.

  1. Check the condition of the lift. This should be done upon accepting the equipment from a rental company, since you may be responsible for any damage that occurs to the lift while you are using it. The operator must inspect the equipment before using,

Follow this Checklist:

  • Fuel level. If you are working in the basket and the machine runs out of fuel, you may be stranded if no one is around to use the auxiliary controls to lower the machine from the ground control panel.
  • Tire condition. Never operate an aerial lift with flat tires, or tires showing damage which may cause them to fail or overbalance and turn over.
  • Hydraulic hoses should be inspected for damage, leaks, etc. You must repair or replace any hoses that appear to be in danger of failing.
  • A fire extinguisher should be mounted in an easily accessible location.
  • Check the oil and coolant levels in the lift’s engine.
  • Make sure all access panels are secured.
  • Check your work area for unlevel or unstable ground, and look at the swing radius of the machine to make sure it doesn’t hit adjacent structures when the machine is rotated.
  1. Turn the remote key switch to Platform Control. This enables the lift engine to be cranked from the platform and engages the platform control panel for controlling the lift’s operation. Make sure the red kill switch button is pulled out at the ground control panel.
  2. Put on a suitable fall arrest harness. Make sure it fits properly, and check the condition of the harness before use.
  3. Climb into the work basket, latch the gate, and fasten the fall arrest lanyard to the D ring provided on the platform. Check to make sure all control identification on the console is readable.There are several different electrical switches and joysticks that control the lift’s operation, and each should be clearly labeled, including the direction of motion they control. Pull the red kill switch button out to enable the engine start switch and power up the console.
  4. Push the engine start switch. This is usually indicated by a cranking engine symbol. If the engine doesn’t turn over when the switch is pushed, you may have to recheck the ground control console kill switch or the master key to make sure they are in the correct position. Refer to the operator’s manual if you cannot get the machine to crank easily.
  5. Stop and take a moment to thoroughly scan the area above and around you, looking specifically for power lines or other hazards.
  6. Look on the platform floor for a boot like enclosure. This is the control engage the lever and is operated by placing your foot in the boot-like cover and pressing down the switch with the toe of your boot to enable to machine’s controls. The engine should rev up when the switch is functioning properly, and most machines are equipped with an alarm that sounds when it is operated to warn bystanders the machine is moving.
  7. Toggle the boom control joystick to raise the boom. Go slowly to start with, it takes time to get used to the motion of the boom. Make sure you are comfortable operating the machine. Newer lifts have a safety device built into both joysticks that requires you to lift a ring underneath the knob on the joystick to allow the device to engage. This prevents the platform from moving unexpectedly if the control is bumped while you are working.
  1. Swing the platform to familiarize yourself with this motion/function. This is done by toggling the joystick in the direction you want the boom to swing Make sure to watch for obstructions before you swing the boom.  
  2. Familiarize yourself with the rest of the aerial lift’s controls, such as the platform rotate control and the platform tilt control. Practice using each of the lift’s functions in a clear, level area before maneuvering it near a structure you intend to work on with it.
  3. Drive the machine to get the feel of the steering/drive controls, and position the platform. remember to watch for obstacles.
  4. Use the right joystick to engage the drive wheels. Most joysticks have steering buttons on top, so to turn your wheels to the right, toggle the right button, to turn left, toggle the left button. Push forward on the joystick to drive the machine forward, and pull the joystick back to back the machine.
  5. Be familiar with all the controls and functions before approaching a structure or position. Read the warning signs around, and remember to review the operator’s manual.

 

 

 

Genie Lift Hire and Training in Sydney

A Genie Lift can be used in a wide variety of industries for a large number of purposes. They can be used by construction companies, tree trimmers, electricians and painters, just to name a few of the industries. If your company uses a Genie Lift, you may find yourself wondering whether you should hire one or whether you should purchase one. There are many benefits associated with hiring a Genie Lift compared to buying one outright, especially if you use one sporadically. Here are a few of the benefits associated with a Genie Lift hire compared to a purchase.

No Servicing

One of the benefits associated with a Genie Lift hire is that you are not responsible for servicing or maintaining the Genie Lift. Maintaining one of these lifts can be time-consuming and costly. The company that rents the unit is responsible for all of its maintenance needs.

The Option to Use Multiple Machines

The second benefit associated with hiring a Genie Lift is that you have the option of using multiple machines. On one job, a scissor lift may be the better type of lift, whereas on another job, a boom or work platform may be the better fit. When you rent a machine, you always have the option of renting the machine that is the best fit for the job you are completing. When you buy a unit, you are stuck with that one type of machine.

Training Provided

The third benefit is that training is provided when you rent a lift. When you buy a lift, no training is given. You are on your own for figuring out how to use the machine properly. This can be dangerous. As such, it makes sense to rent and get training, ensuring everyone on your job site is kept safe.

Lower Costs

The fourth benefit associated with hiring a Genie Lift compared to purchasing one is the price. Buying a Genie Lift is costly. You have to put up thousands of dollars to buy one, and then you have to pay to maintain the unit. When you rent a unit, you are not putting up as much money upfront and you do not have to pay to maintain the unit. If your business does not have a lot of money sitting in its accounts, renting may make more sense.

Speed of Delivery

The final benefit associated with a Genie Lift hire is that the unit can be delivered to your job site quickly. When you purchase a unit, it may take weeks or months to get the ordered unit constructed and delivered to you. Odds are, you don’t have weeks or months to wait. Renting helps you get the machine you need in a timely manner.

There are many benefits to a Genie Lift hire, compared to purchasing one outright. If you are ready to learn more about hiring a Genie Lift Sydney, contact Power Access today. We can help you determine the right type of Genie Lift for your job, schedule a rental period and then deliver the lift directly to your job site. Contact us today to get started.